PE Fittings
Adjustable Drip Bubbler
Product Description:
Polyethylene bubbler or (fountain) is a type of polyethylene connection that is used in drip irrigation and distributes water in the form of an umbrella with a diameter of about 60 centimeters (bubblers have different flow rates from 30 to 120 liters per hour). Isfahan Plast is from 1.5 to 4 atmospheres and the construction of this bubbler has no moving parts, so its installation is very simple.
Adjustable Tee Type Dripper 16
Product description:
This product has three equal ways and there is an adjustable dropper in the middle outlet.
Butt Fusion 90 Degree Elbow
Product description:
It is a connection that is installed between two pipes to provide the possibility of changing the direction of the fluid with a 90-degree angle. This type of connection is the most used in different types of elbow angles.
Butt Fusion End Cap
Product description:
The welding cap is welded by a polyethylene welding machine at the end of the lines and where blocking is required.
Butt Fusion Equal Cross Fitting
Product description:
This polyethylene connection is in the form of a crossroad, which is used to branch off the polyethylene pipe with 4 equal exits compared to the pipe, and a butt welding device is used to connect it.
Butt Fusion Equal Tee Fitting
Product description:
The three equal ways of polyethylene welding have 3 entrances and exits of the same size and with an angle of 90 degrees, and they are welded and connected to other joints with a polyethylene welding machine.
Butt Fusion Flange
This product is made of polyethylene and is welded on a polyethylene pipe and is used to connect two pipes to each other in the pipeline.
Butt Fusion Reducer
Product description:
Welding conversion is used to change the diameter of the pipes and connect the pipe parts to each other or in the parts that need to change the flow inside the pipe.
Butt Fusion Reducer Cross Fitting
Product description:
This polyethylene connection is in the form of a crossroads, which is used to branch off a polyethylene pipe with two unequal outlets compared to the pipe, and a butt welding device is used to connect it.
Butt Fusion Reducer Tee
Product description:
This polyethylene connection is in the form of a tee, which is used to branch off the polyethylene pipe with an unequal outlet compared to the pipe, and a butt welding machine is used to connect it.
Clamp Saddle
Product description:
The polyethylene belt is used for branching from the polyethylene pipe and it consists of two semi-circular pieces of polyethylene placed on the pipe and connected by two or more bolts and nuts placed on the holes on both sides of it. be.