Hydroflow Pipe
Product description:
Hydroflow pipes are produced in sizes of 2 to 20 inches from soft polyethylene. The length of the rolls varies from 50 to 100 meters depending on their size and the weight of each roll varies from 10 to 100 kilograms.
| PRODUCT CODE | SIZE (INCH) | LENGTH OF EACH ROLL(METER) |
|---|---|---|
| 30042120063 | 2 | 100 |
| 30042120090 | 3 | 100 |
| 30042120110 | 4 | 100 |
| 30042120125 | 5 | 100 |
| 30042120160 | 6 | 100 |
| 30042120200 | 8 | 100 |
| 30042120250 | 10 | 80 |
| 30042120315 | 12 | 80 |
| 30042120400 | 15 | 80 |
| 30042120450 | 18 | 80 |
| 30042120500 | 20 | 80 |
The method of connecting the valve on the Hydroflow pipe:
1- Widening the pipe along the desired path.
2- Connecting pipes to each other.
3-Closing the end of the pipe.
4- Open the water flow in the pipe.
5- Perforating the pipe with a punch. With a special punch, a hole with a diameter of 3 to 3.5 cm is created on the filled pipe.
6- Valve installation.
The valve is easily installed in the place of the hole created by the punch. The valve consists of two parts, the body and the valve head.
7- Adjusting the output of pipes. The output of each valve can be adjusted from (zero) liters per minute (fully closed) to 2.5 liters per minute (fully open).
Please note that: the connections required for the implementation of the Hydroflow irrigation system are end clamps, metal clamps and handles, galvanized, three-way and four-way galvanized connections and air intakes.
